Valve Collet Remover/Installer Lapping Set 5pc

SKU: VS1543

£35.96

Excluding VAT

For quick removal/installation of valve collets with cylinder head in situ or on workbench. Remove/install by firmly pushing or tapping the tool with a hammer. The magnet in the tool captures the collets. Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. For use in situ, a suitable adaptor will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring. The Set also includes two valve lapping tools with wooden shafts and four sizes of rubber suction cups. Suitable for grinding most engine valves. Supplied in a storage case.

Fast Delivery

Secure Checkout

Expert Advice

QUICK – Removal/installation of valve collets with the cylinder head in situ or on a workbench.
REMOVE/INSTALL – By firmly pushing or tapping the tool with a hammer. The magnet in the tool captures the collets.
IDEAL -For replacing broken valve springs or valve stem oil seals without removing the head from the engine.
USE IN SITU – A suitable adaptor will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.
INCLUDES – Two valve lapping tools with wooden shafts and four sizes of rubber suction cups.
SUITABLE – For grinding most engine valves.
STORAGE CASE – Keeps everything in one convenient place.